Follow us
Get in touch!

Unit 6 Stoneacre
St James Retail Park
Grimbald Crag Close
Knaresborough
HG5 8PJ
A white background with the Haredata electronic logo

FRIWO | UK

Applications & Case Studies: Ultrasonic Instrument

Ben Winstanley • September 11, 2019

Fitting Custom Connectors to Power Supplies

We approached a local manufacturer of an ultrasonic instrument, who had until then been sourcing off the shelf power supplies manufactured in China, albeit from a UK distributor. Their main issue was the need to fit a very small pitch ODU connector – as a result they had to use a very small gauge output cable, and even then the fitting of the connector was the main limiting factor in their production process.

We were able to offer an alternative power supply, which was the correct rating for their instrument, this removed the possibility of the power supply delivering more current under fault conditions than the cable could safely handle. However, the biggest benefit to the OEM was our ability to fit the connectors in house in a very efficient manner – meaning they saved cost, only dealt with one supplier, and crucially it freed up their labour to do what they did best – i.e. manufacture the instrument, while we supplied the completed PSU. This arrangement enabled an increase in production throughput, and was instrumental in allowing our customer to secure a large order on a short leadtime, which under the previous arrangement, they would not have had the time to do.

We can help with your application too...
If you have a requirement for Power Supplies, Battery Chargers, Batteries or Connectors for your application, get in touch with the Sales team at Haredata to find out how our products can help power your products success.

CONTACT US

COMMENT ON THIS POST

SHARE THIS POST
While you're here, why not read some of our other blog posts?
We are 99% sure you'll learn something!
A black charger with a green light on it is sitting on a table.
By Alex Chapman January 7, 2025
Your Guide To Selecting The Ideal Charger
A group of Friwo FOX NEO Power Supplies
By Alex Chapman July 11, 2024
If you're wondering how o find the power power supply, check out this guide to help make your decision simple!
Medical devices in an operating theatre
By Alex Chapman July 11, 2024
Why is power so important for medical devices. Join us as we explore what makes power supplies, batteries and chargers so important for medical devices.
A group of DC connectors with USB Type-C, Magnetic connector, Barrel connector with inner pin
By Alex Chapman February 23, 2024
Join us for a deep dive into the pros and cons of Direct Current (DC) connectors. have a project that requires a DC connector? Find your perfect match here!
The UKCA Guide for manufacturers of technical products and medical devices
By Ben Winstanley November 18, 2021
Introduction
An exoskeleton object with the letter x on it
By Ben Winstanley October 6, 2021
INDEPENDENT POWER SUPPLY FOR MEDICAL EXOSKELETONS A FRIWO systems solution in practice Finally being able to walk again. ExoAtlet, the renowned medical technology company, wants to grant that exact wish to its patients with physical disabilities. The specially designed and built exoskeleton allows people who have been confined to a wheelchair to stand freely, and without assistance, for the first time since their disability – and not only stand, but walk! The “ExoAtlet II” skeleton allows the wearer to move at different speeds as well as across different types of terrain without being hindered by stairs or other obstacles.
Battery Charging
By Ben Winstanley May 12, 2021
Selection and operation of a battery charger
Switchmode Power Supplies vs Linear Power Supplies
By Ben Winstanley May 5, 2021
Switchmode Power Supplies vs Linear Power Supplies The vast majority of low voltage external power supplies sold globally these days are switching (switchmode) units, as opposed to the original Linear technology, which is only considered appropriate for certain niche markets due to it’s inability to meet required efficiency standards. In this article we will explore just some of the technical aspects & features and benefits of Switchmode topology vs Linear.
Micro USB Vs USB-C Comic Battle - Visual Created by Haredata Electronics
By Ben Winstanley January 28, 2021
The micro USB connector has been the most common connector for plug top devices for the last few years, but as with everything the times are changing. This is where the Type-C USB has started to step in, with more and more pieces of tech coming with a Type-C charger rather than the old favourite. So the question is why? If the old micro USB isn’t broken then why ‘fix’ it? 
The New UKCA (UK Conformity Assessed) Marking
By Ben Winstanley December 15, 2020
The UKCA (UK Conformity Assessed) marking is a new UK product marking that will be used for goods being placed on the market in Great Britain (England, Wales and Scotland). It covers most goods which previously required the CE marking.
More Posts
Share by: